Power Tool Accessories

The S1531L Top for Wood Reciprocating Saw Blade delivers clean fast cuts for pruning wooden materials. Its pointed, sharp-ground teeth are excellent for exact pruning results and also prevent damage to plants. Made of HCS (high carbon steel), the reciprocating saw blade is appropriate for pruning green wood. It has a long length of 240 mm, which enables a cutting capacity of up to 190 mm. For use with reciprocating saws with 1/2 inch universal shank systems.

These Bosch S922EF BIM Flexible for Metal Reciprocating Saw Blades x5 2608656015 are high quality sabre saw blades that are flexible and are designed for use with thin sheet metals and pipes. The fine tooth pitch cuts materials of all common thicknesses, made of BIM (bi-metal), the blade is engineered for long lifetime when cutting regular-strength steel.

Minicol is a universal glue applicator and the ideal solution for applying glue in 4 mm grooves. Unlike with a glue bottle, the glue exits the nozzle on the sides. Therefore glue is applied to the groove sides instead of the groove bottom, resulting in better distribution and a more stable joint. As the glue applicators are positioned with the nozzles facing downwards in the wooden base, the glue leaves the nozzle immediately and drying out is prevented. In addition to the plastic nozzle, a metal nozzle for biscuit grooves and a pointed nozzle are also available.

Lamello Groove cutter HW for Classic X, Ø100x4xØ22 mm, Z6 alternating teeth

The world's best-selling slats number 0 Wooden construction Box with 1000 pieces For cutter Ø 100 x 4mm Size 0 : 47 x 15 x 4mm

The Clamex P-14 Flexus is a demountable connector based on the P-System anchoring system The hardware is connected with a rotating lever The Clamex P-14 Flexus thus offers all the advantages of the P-System, such as fast assembly without tools, good sliding tolerance, resistance to tearing and stacking New to the Clamex P-14 Flexus are the flexible positioning pins The flexible positioning pins mean that no fixed elements protrude from the connector This new feature allows workpieces to be retro-fitted into existing elements, significantly simplifying the assembly sequence The positioning pins serve as positioning and fixing elements for the workpieces For example, fixed shelves are held in place while workpieces are pulled together with an Allen key Because the positioning pins slope down on both sides, the workpiece can also be dismantled The positioning pins fit perfectly into the counter piece, so that even elements with a 90° miter can be mounted easily